Concrete Contractors in Lexington, NC
Concrete Contractors contractor serving Lexington and Davidson County.
Concrete Contractors in Lexington, Davidson County
concrete contracting in Lexington, NC.
Lexington sits on Cecil-Appling clay in most of town, with Enon-Iredell diabase intrusion in the northeast neighborhoods around Sunset Ridge and 12 Oaks. Patios in Lexington deal with two distinct soil behaviors depending on lot location. Cecil clay holds water and heaves seasonally; diabase-derived soil shrinks aggressively during summer drought. Both problems get solved the same way: proper base preparation. Every patio pour begins with 4 inches of ABC crushed stone compacted to 95 percent standard proctor density, a 6-mil vapor barrier where the patio sits within 10 feet of the house foundation, and a 4-inch 3000 PSI slab with 6x6 W1.4/W1.4 welded wire mesh. Expansion joints go every 8 to 10 feet with control joints saw-cut within 12 hours. Broom finish, salt finish, or exposed aggregate are all workable finishes in Lexington; salt finish holds up especially well in the shaded lots common in 12 Oaks and Sunset Ridge because it does not show algae staining as aggressively as smooth troweled surfaces. All permits and inspections coordinate through Lexington Development Services on West Ballentine Street.
Permits, inspections, and code compliance in Lexington
Every concrete contracting project in Lexington includes permit paperwork and inspection coordination through Davidson County and, where applicable, the Lexington planning office. Residential concrete work in North Carolina follows the 2018 NC Residential Code: continuous footings extend to the 12-inch frost line minimum per section R403, slabs on grade follow section R506, and the specified reinforcement schedule is #4 rebar on 16-inch centers or 6x6 welded wire mesh chair-supported at mid-slab depth. We schedule inspections 24 to 48 hours in advance so the pour timeline holds, and we walk every inspector through the work in person to keep the review moving.
Materials, cure schedule, and warranty
Residential concrete contractors in Denton typically run $7-$16 per square foot depending on thickness, reinforcement, and finish. Pricing bands sourced from Angi 2026 and HomeAdvisor 2026 concrete contractor data. Concrete cure schedule follows ACI 308 recommendations: 24 hours before foot traffic, 7 days before load, 28 days for full design strength. Every job carries a written one-year workmanship warranty. If a warranty concern arises within the first year, one call brings us back on site.
Why homeowners choose us
- Owner supervised — the person quoting the job is on the pour
- In-house crew, never subcontracted
- One-hour callbacks, written estimates
Call us for a free on-site estimate.
Neighborhoods we serve in Lexington
We work across established neighborhoods and newer developments in Lexington including:
Zip codes: 27540
We also serve Lexington:
Serving the area around Lexington, NC
Why hire a local crew
We're local to Davidson County. We know the soils, the permit offices, and the HOAs. Every job stays in-house.
- Owner on every job site
- Written line-item estimate
- Clean finish, permits handled
Concrete Contractors we build in Lexington
Complete concrete contractors services for residential projects across the region.
Residential
- Concrete Driveways
- Concrete Patios
- Concrete Foundations
- Stamped Concrete
- Sidewalks & Walkways
- Concrete Repair & Replacement
Light Commercial
- Small business slabs
- Loading pads
- ADA ramps
- Storage building floors
- Small parking areas
How the project flows
- Call or ContactReach out by phone or form — we respond within one business hour.
- Free On-Site VisitWe come to the property, measure, and discuss what you want.
- Written EstimateClear line-item quote covering scope, materials, and timeline.
- Scheduled PourWe schedule around your calendar and the weather. Crew arrives on time.
- One-Year WarrantyEvery job carries a written one-year workmanship warranty.
Common questions
How much does concrete contracting cost in Lexington?
Residential concrete contractors in Denton typically run $7-$16 per square foot depending on thickness, reinforcement, and finish. Pricing bands sourced from Angi 2026 and HomeAdvisor 2026 concrete contractor data. We give a written estimate on site.
How long does concrete take to cure in Lexington?
You can walk on it after 24 hours, drive on it after 7 days. Full design strength at 28 days.
Do you serve Lexington?
Yes — Lexington is inside our regular service area. We do concrete contracting across the Davidson County region.
Nearby towns
What We Do
Concrete Contractors services in Denton
Residential concrete contracting across Denton, Lexington, Southmont, Welcome, and Silver Valley. in Lexington
Concrete Driveways
Residential driveways sized to the lot, 4-inch slab with rebar reinforcement, expansion joints per NC code, broom or exposed-aggregate finish.
Concrete Patios
Backyard patios and pool decks graded for drainage, 4-inch slab with wire mesh, control joints saw-cut within 12 hours, broom or salt finish.
Concrete Foundations
Slab foundations, footings, and stem walls for additions and outbuildings. Rebar-graded per NC Residential Code, permit and inspection handled.
Stamped Concrete
Decorative stamped concrete driveways, patios, and walkways. Color-integrated, sealed, warrantied — real stone and slate patterns.
Sidewalks & Walkways
Sidewalks and connecting walkways pitched away from foundations, jointed to prevent random cracking, ADA-compliant where required.
Concrete Repair & Replacement
Slab crack repair, settlement remediation, and full replacement when the base has failed. We diagnose the cause before we quote the fix.
Get a free estimate
for your Denton project
We respond within one business hour, every day.